SPEC
2 - 12
MAINTENANCE SPECIFICATIONS
CHASSIS
Item
Standard
Limit
Steering system:
Steering bearing type
Taper roller bearing
----
Front suspension:
USA, CDN
AUS, NZ, ZA
EUROPE
Front fork travel
300 mm (11.8 in)
←
----
Fork spring free length
460 mm (18.1 in)
←
455 mm (17.9 in)
Spring rate, STD
K = 4.31 N/mm
(0.44 kg/mm,
24.6 lb/in)
K = Approx.
4.21 N/mm
(0.43 kg/mm,
24.1 lb/in)
----
Optional spring/spacer
Yes
←
----
Oil capacity
568 cm
3
(20.0 lmp oz,
19.2 US oz)
←
----
Oil level
140 mm (5.51 in)
←
----
<Min.~Max.>
(From top of outer tube with inner
tube and damper rod fully com-
pressed without spring.)
80 ~ 150 mm
(3.15 ~ 5.91 in)
←
----
Oil grade
Suspension oil
“01”
←
----
Inner tube outer diameter
46 mm (1.81 in)
←
----
Front fork top end
5 mm (0.20 in)
←
----
Rear suspension:
USA, CDN,
AUS, NZ, ZA
EUROPE
Shock absorber travel
132 mm (5.20 in)
←
----
Spring free length
260 mm
(10.24 in)
275 mm
(10.83 in)
----
Fitting length
248 mm
(9.76 in)
262 mm
(10.31 in)
----
<Min.~Max.>
242 ~ 260 mm
(9.53 ~ 10.24 in)
257 ~ 275 mm
(10.12 ~ 10.83 in)
----
Spring rate, STD
K = 47.0 N/mm
(4.80 kg/mm,
268.8 lb/in)
K = Approx.
49.0 N/mm
(5.00 kg/mm,
280.0 lb/in)
----
Optional spring
Yes
←
----
Enclosed gas pressure
1,000 kPa
(10 kg/cm
2
,
142 psi)
←
----
Swingarm:
Swingarm free play limit
End
----
1.0 mm (0.04 in)
