background image

 

1 - 2

GEN

INFO

 

MACHINE IDENTIFICATION

 

EC120001

 

MACHINE IDENTIFICATION

 

There are two significant reasons for knowing
the serial number of your machine:

1. When ordering parts, you can give the

number to your Yamaha dealer for posi-
tive identification of the model you own.

2. If your machine is stolen, the authorities

will need the number to search for and
identify your machine.

 

EC121001

 

VEHICLE IDENTIFICATION NUMBER

 

The vehicle identification number 

 

1

 

 is

stamped on the right of the steering head pipe.

 

EC123001

 

ENGINE SERIAL NUMBER

 

The engine serial number 

 

1

 

 is stamped into

the elevated part of the right-side of the
engine.

 

EC124000

 

MODEL LABEL

 

The model label 

 

1

 

 is affixed to the frame

under the rider’s seat. This information will be
needed to order spare parts.

Summary of Contents for YZ250F(P)/LC



























































































































































































































































































































































































































































































































































































































































































Reviews: