7 - 14
T U N
SETTING
EC727020
Spring preload adjustment
The spring preload is adjusted by installing the
adjustment washer
1
between the fork spring
2
and damper rod
3
.
CAUTION:
Do not install three or more adjustment
washers for each front fork.
WARNING
Always adjust each front fork to the same
setting. Uneven adjustment can cause poor
handling and loss of stability.
Å
Load
ı
Fork stroke
1
Without adjustment washer (standard)
2
1 adjustment washer
3
2 adjustment washers
Standard washer quantity:
Zero adjustment washers
Extent of adjustment:
Zero ~ 2 adjustment washers
EC72A001
Setting of spring after replacement
As the front fork setting can be easily affected
by rear suspension, take care so that the
machine front and rear are balanced (in posi-
tion, etc.) when setting the front fork.
1. Use of soft spring
Generally a soft spring gives a soft riding
feeling. Rebound damping tends to
become stronger and the front fork may
sink deeply over a series of gaps.
To set a soft spring:
●
Change the rebound damping.
Turn out one or two clicks.
●
Change the compression damping.
Turn in one or two clicks.
