4 - 86
ENG
ENGINE REMOVAL
2. Install:
• Lock washer
1
• Nut (drive sprocket)
2
NOTE:
Tighten the nut while applying the rear brake.
T
R
.
.
75 Nm (7.5 m · kg, 54 ft · lb)
3. Bend the lock washer tab to lock the nut.
4. Install:
• Drive chain sprocket guide
1
• Drive chain sprocket cover
2
• Screw (drive chain sprocket cover)
3
T
R
.
.
8 Nm (0.8 m · kg, 5.8 ft · lb)
Oil hose and neutral switch
1. Install:
• O-ring
1
• Dowel pin
2
• Oil hose
3
• Bolt (oil hose)
4
NOTE:
Apply the lithium soap base grease on the O-
ring.
2. Install:
• Spring
1
• Pin
2
• O-ring
3
• Neutral switch
4
• Screw (neutral switch)
5
NOTE:
Apply the lithium soap base grease on the O-
ring.
T
R
.
.
8 Nm (0.8 m · kg, 5.8 ft · lb)
T
R
.
.
4 Nm (0.4 m · kg, 2.9 ft · lb)
