30 (42)
5.10.7
Docking
The storage cradle should be sufficiently steady and suitable for this particular boat and
engine combination. A sturdy plank (e.g. a 2x4) should be placed between the V trestles to
support the keel and the bear most of the weight of the boat. The boat must not rest on the
side supports. The side supports should not be placed touching the bottom chine, and point
loads should be avoided. The supporting structures should be strong, particularly near the
transom, to support the added weight of the engine. Storage cradle dimensions are shown in
the picture below.
Storage cradle dimensions
Only use reputable lifting companies or boat yards with sufficient
lifting capacity. In addition to the boat’s tare weight (please refer to the technical
specification), also take into consideration accessories and other possible loads in the boat.
When the boat is being lifted, the lines must be placed under the boat and the boat must
remain horizontal during lifting.
NOTE!
Do not lift the boat by its bollards.
DANGER!
Never stand under a boat that is suspended from a crane.
Summary of Contents for Cross 75 Bow Rider
Page 1: ...Yamarin Cross 75 Bow Rider User manual...
Page 41: ...41 42 8 5 Wiring diagram...
Page 42: ...42 42...