![background image](http://html.mh-extra.com/html/yamato/az7000sdr-8/az7000sdr-8_instruction-manual_905396025.webp)
5. Proper operation
15
AZ7000SDR-8, 7500SDR-8
5.4 Pressure of presser foot
Loosen the lock nut ① and adjust the pressure of the
presser foot by turning the adjusting screw ②.
● To increase the pressure, turn the adjusting screw
clockwise.
● To decrease the pressure, turn the adjusting screw
counterclockwise.
Keep the pressure as low as possible for stable stitch.
Fig. 5-7
decrease
increase
②
①
5.5 Releasing presser foot
Rotate the machine pulley and position the needle at the
highest point. Release the presser foot to the left while
pressing the presser foot release lever ③.
To set the presser foot, slide and press the presser foot to
the right while pressing the presser foot release lever ③.
Then, release the lever.
Fig. 5-8
③
④
⑤
Make sure that the presser arm ④ gets into the groove
of the presser bar ⑤.
If not, it can cause breakage to parts and injuries.
ÃÁÕÔÉÏÎ
Before adjusting, ALWAYS turn the motor switch OFF
and check that the motor has already stopped.
ÃÁÕÔÉÏÎ