12
Operation Method
Selecting operation mode
The following four operation modes are used.
No.
Operation mode
Function
Page
1
Fixed Temperature
Operation
The device controls the constant temperature.
13
2
Auto Start Operation
The device starts operation at the specified time.
15
3
Auto Stop Operation
The device stops operation at the specified time.
18
4
Program Operation
The device starts programmed operation at the specified
time.
21
Operation Selecting Method
NOTE)
Make sure that the power is on.
§
Press the menu key.
MENU
§
The sub indicator indicates operation mode selection window.
Fixed temp OP.
OP.mode choice
STANDBY
END
HEAT
FAN
FIXED TEMP
AUTO START
AUTO STOP
PROGRAM
§
The operation mode on the sub indicator blinks and the corresponding lamp blinks. The
indication can be changed in the order of “Fixed temperature operation”
→
”Auto start”
→
”Auto stop”
→
”program operation” by turning the jog dial to the right. The corresponding
lamp also blinks.
§
Press the menu key again to cancel the selection.
§
The operation mode can be selected from the table below.
No.
Operation mode
Mode Lamp (blink)
Sub Indication
(The hatching area is blinking.)
1
Fixed Temperature
Operation
Fixed Temp Lamp
Fixed temp OP.
OP. mode choice
2
Auto Start Operation
Auto Start Lamp
Auto-start OP.
OP. mode choice
3
Auto Stop Operation
Auto Stop Lamp
Auto-stop OP.
OP. mode choice
4
Program Operation
Program Lamp
Program OP.
OP. mode choice
