YCO-1049-02-03
PPC-200W
Technical Manual
Table of Contents
Before using the scale, carefully read, understand and follow the “Safety Instructions” described in this manual. Observe the advice given
in the “Operations” section to ensure proper operation. Keep this operation manual handy for reference.
1) This scale is
not
an explosion-proof model. Do not use the scale in an atmosphere containing fl ammable gases or explosive fumes. A
fi re or an explosion can result.
2) Do not operate the scale if there is smoke or a burned smell coming from the scale. Unplug the scale immediately. After making sure that
there is no danger, consult your dealer. Never try to repair the scale by yourself.
3) Never step on or sit on the scale. Not only will the scale be damaged, but you may also be injured.
4) Place the item to be weighed in the center of the platform. Items placed on the edge of the platform may fall off and cause injury.
5) When weighing a heavy, large or unbalanced item, make sure the item is stable on the platform, otherwise, an accident may occur.
6) When carrying or moving the scale, be sure to hold it by the bottom of the base with both hands. If you hold it by the platform, the plat-
form or the platform support may become detached causing the scale to fall. This will damage the scale. The platform is designed for
easy removal and cleanup.
7) Do not insert your fi nger into the gaps or holes in the scale. You may be injured.
SAFETY INSTRUCTIONS
I. Introduction 1
II. Set-up Procedures 1
A. User Mode 1
B. Test Mode 2
C. System Parameter Mode 3
D. Calibration Mode 4
E. Factory Parameter Mode 5
III. Troubleshooting 6
IV. Parameter Lists 7
A. User Parameters 7
B. System Parameters 8
C. Factory Parameters 8
D. Standard Factory Parameter Settings 11
V. Wiring Diagram 14
VI. Parts List 15
