RH 1250/32 – cod. 55116
14
EQUIPMENT
1 pc. Rotary Hammer YAMATO mod. RH 1250-32
1 pc. handle and rule
1 pc. Grease tub
5 pcs. Bits (3 SDS-PLUS ø8/10/12 x150mm. + 2 Chisels)
1 pc. Dust protector
1 pc. Manual Instruction
1.
TECHINICAL DATA
Model
RH 1250/32
Code
55116
Rated voltage
230 240 V – 50 Hz
Protection
Classe ll
Rated power
1250W
Speed
1
No load speed
800 r.p.m.
Impact energy
4,5 J
Drilling performance
32 mm.
Concrete / stone / wood
32-13-40 mm.
Impact per min.
2.600 b.p.m.
Net weight
5,8 Kg.
Vibration weighted acceleration rotary
hammer m/s
2
21.069m/s
2
, K=1.5 m/s
2
Vibration weighted acceleration hammer
m/s
2
16.059m/s
2
, K=1.5 m/s
2
Sound power level rotary hammer dB (A)
LpA 95 dB
LwA 106 dB
Sound power level hammer dB (A)
LpA 92 dB
LwA 103 dB
Noise/Vibration Information
Measured values determined according to EN 60745.
Uncertainty K=3 dB.
Wear hearing protection!
The typically weighted acceleration is on the above table.
The vibration emission level given in this information sheet has been measured in
accordance with a standardised test given in EN 60745 and may be used to compare one
tool with another. The vibration emission level will vary because of the ways in which a power
tool can be used and may increase above the level given in this information sheet.
Note:
To be accurate, an estimation of the level of exposure to vibration experienced during
a given period of work should also take into account the times when the tool is switched off
and when it is running but not actually doing the job. This may significantly reduce the
exposure level over the total working period.
Intended Use
When using electric tools it is imperative to take the following basic safety precautions in
order to reduce the risk of electric shock, injury and fire. Read and take note of these
instructions before you use this tool.
3. GENERAL SAFETY REGULATION
Summary of Contents for RH 1250-32
Page 13: ...RH 1250 32 cod 55116 13 ...
Page 19: ...RH 1250 32 cod 55116 19 ...