YCO-1092-01-02
SPC-2002/5005
Operation Manual
3
FEATURES AND CONTROLS
The SPC series scale has several controls:
A. To turn on the scale, press the
ON
O/T
key.
B. To turn off the scale, press the
oz
g
lb
key and the
G
N
key simultaneously.
C. The
ON
O/T
key activates the tare function. When the
ON
O/T
key is pressed the digital display will read
"tare" before resetting to "0".
D. The
oz
g
lb
key toggles between the two selected units of measure (lb-oz/g, lb/g or oz/g).
E. Pressing the
G
N
key will toggle the display between gross weight and net weight.
F. Automatic Shut-Off: When enabled, the scale will automatically shut off after two minutes of non-use
(thirty seconds when zero is indicated on the digital display).
WEIGHING PROCEDURES
A. Set the scale to the desired measuring units:
1. Remove the rectangular plug at the rear of the scale to expose the four place dip switch shown
below.
Example: Decimal lb / g mode with g displayed at power up, auto-off feature disabled.
a. Dip Switch functions:
Switch 1 and 2 select
Switch 3 selects
Switch 4 controls
units of measure
gram/lb-oz preference
Auto-off feature
at power up
2. Set the switches to the desired combination and replace the rectangular plug.
B. Gross Weighing
1. Remove any load from the scale platform.
2. Depress the
ON
O/T
key to turn on the scale. The display will briefly show all digital segments (figure
eights), then the scale will automatically reset to zero.
3. If the scale is already on, simply press the
ON
O/T
key to reset the display to zero.
4. Place the item(s) to be weighed on the scale platform. The weight displayed will be the gross
weight.
1 2 3 4
High (H)
Low (L)
1
2
Switch#
H
H
lb-oz / g
H
L
cont. oz / g
L
H
dec. lb / g
L
L
gram only
3
Switch#
H
lb/oz mode
L
gram mode
4
Switch#
H
disable auto-off
L
enable auto-off*
*The scale will shut off after
2 minutes of non-use.
