DC Inverter U-match Series Floor Ceiling Type Unit
36
For the indoor unit whose packaging materials are with the buckle magnetic
ring. The engineering electric wires (live wire, neutral wire, earthing wire and
communication cable) should pass through the buckle magnetic ring before entering
into the unit. The magnetic ring should be fixed reliably by cable tie. The
engineering wires and buckle magnetic ring are not allowed to touch sharp edges.
The number of magnetic rings is based on 3.2.
(Note
:
Only for
YFC48G4/I
,
YFC60G4/I
units.)
As shown in the figure below, the engineering zero-fire communication line
passes through the magnetic ring 2 times, and the magnetic ring is reliably fixed
with a cable tie, and the insulation of the power cord needs to be fixed at the fixer
clamp.
(Note
:
Only for
YFC42G4/I
units.)