background image

9

 

After Service and Warranty 

Yamato Warranty Policy  

Yamato Scientific America warrants, from the date of shipment from Yamato warehouse, for a period of 

one (1) year. All products, parts and materials shall be free of defects in material and workmanship 

under normal use consistent with the product instructions. This product warranty does not apply to 

products purchased from unauthorized resellers/distributors.  

Yamato reserves the right to inspect the product under claim before having an obligation to repair or 

replace the defective unit covered by this warranty. All costs of shipping to Yamato for inspection shall be 

borne solely by the purchaser. Products repaired or replaced under the terms of the warranty may be 

refurbished or new product will be provided at the discretion of Yamato. 

Warranty Conditions  

This warranty does not apply to equipment or parts which fail because of abuse,  accident, alteration, 

misuse, erosion, improper installation, or improper replacement of a repaired item. 

Consumables such as gloves, bulbs, or filters are not covered under this warranty. 

The buyer assumes all risks for results obtained from these products, whether used alone or in 

combination with other items.   It is expressly understood that we are not responsible and will not be held 

liable for damage and/or injury caused using our products. 

Product Return Policy 

If you are not satisfied with your purchase and wish to make a return, contact our customer service to 

inquire about a Return of Merchandise Authorization Number (RMA). Merchandise returned without an 

RMA number will not be accepted and will be returned to the sender. Return requests must be made 

within 15 days of the customer’s receipt of the merchandise.  

All returns must be unused and in unopened original packaging and include all items and manuals 

originally shipped.  

The purchaser is responsible for the shipping cost of return shipment. Insurance on the return shipment 

is required. Damage or loss of merchandise during shipping is the responsibility of the sender. Returned 

shipments that arrive damaged will be returned back to the sender, and credit will not be rendered.  

All returned products, parts and materials are subject to a 25% restocking fee. Shipping and handling 

cost are non-refundable. All retrofitted, customized and special order item sales are final and non-

returnable.

 

In Case of Request for Repair 

If  the  failure  occurs,  stop  the  operation,  turn  OFF  the  power  switch,  and  unplug  the  power  plug.    Please 

contact the sales agency that this unit was purchased, or Yamato Scientific's sales office. 

< Check following items before contact > 

Model Name of Product

Serial Number

Purchase Date

Issue (as detailed as possible)

Summary of Contents for VBE204












Reviews: