To attach the front panel:
Push hooks marked in circle into the proper positions on the
front of chassis.
4. Installing MB and Add-on cards
To check the mounting hole of the mainboard, screw on the optional standoffs
into chassis. To install the I/O shield provided with mainboard, insert it from inside
of chassis towards outside.
Screw off the PCI holder bracket in the rear end of chassis; remove the bracket.
Insert add-on card into
slot.
The bracket is designed
to fix all add-on cards in
one screw.
5. Installing 3.5” devices
5.1. Remove the screw marked in circle.
Pull the 3.5”cage toward the rear chassis
Screw on the card reader (or FDD) with M3 type screws
(4pcs). Screw on the HDD with 6#32 screws (4pcs).
