X4
8
3. Use the M4 Allen wrench to loosen the fixing screws of the controller and the
iron plate to remove it.
(Note: When installing, the positive and negative wiring cannot be wrongly
connected)
Disassembly and assembly of the second-generation self-propelled controller:
1. Turn off the main power supply to ensure that after the machine is powered off,
the sewage is drained and the sewage tank is turned over.
2. Remove the handle iron plate fixing screws.
3. Loosen the positive and negative wiring of the power supply, and drive the
positive and negative wiring of the motor.
4. Use the M4 Allen wrench to loosen the fixing screws of the controller and the iron
plate to complete the removal.
(Note: When installing, the positive and negative wiring cannot be wrongly
connected)
3.7 Filter maintenance and removal
Chapter 4 Analysis Table of Common
Problems of Floor Scrubber
Summary of Contents for X4
Page 1: ...X4 FLOOR SCRUBBER Operating instruction...
Page 17: ...X4 1...
