10
YZ-X1
Instruction Manual
by water absorption gripper wheel.
(4) check the wear condition of the scraper edge, if the wear is serious, and through
adjustment has been unable to recover, the scraper glue
If the other side is worn out, it can only be replaced with a new strip.
The normal configuration is the ordinary rubber strip. If you are using in the environment
with heavy oil, please purchase the special oil-resistant rubber strip.
12. Work at the end of each day:
(1) Clean the outside of the cleaning machine with dry and wet cloth;
(2) the sewage tank in the sewage empty, and clean;
(3) Lift the brush plate and water absorption rack, and put the floor washer on all sides
without flammable gases, liquids and chemicals.
No open fire, dry and ventilated, flat environment, placed or charged;
(4) If the long-term stop use should also be regularly charged, to protect the battery life,
open the cover air drying, in the washing machine
Cover the top with dustproof cloth for storage.
