8
YZ-X1
Instruction Manual
2) Adddetergenttothe waterinjectionportbeforestarting tofillthe cleanwater tank.
If you are using a water pipe to get water from the tap, you can insert the water pipe
directly into the side of the machine.But you can pay attention to the water level, in case
the cleaning fluid overflow!
Start homework:
1. In the area to be cleaned, the ground should be cleaned first to remove large debris and
dust.Make sure that the ground is free of dirt, stones, paper scraps and other sundries
before cleaning, which can improve your work efficiency and protect the machine
Great benefits;
2. Start the power switch lock and the indicator light of power level is on. Check the
battery level and confirm that the power level is sufficient before cleaning.Charge the
battery if the battery is low;
3. Put the forward and backward switch into the forward gear.
4. Start brush plate motor, water suction motor and button switch in sequence;
5. Adjust the flow of clean water (detergent) according to the situation of washing the
ground, move up and down to adjust the amount of water, adjust the handle and control
the water flow;It can both clean the floor and reduce the wear and tear of clean water
(detergent).
6, starttheswitch, brushmotor, solenoid valve open,the machinestarts to work
Note: The adjustment of water absorption strip will directly affect the water absorption
effect of suction strip. It is necessary to keep the suction strip and the ground attached
evenly. After the strip is worn out, the adjustable 10000 direction wheel knob will be used
to keep the suction strip and the ground in an appropriate position.
7 as a result of the uneven ground, sometimes although after cleaning, if there is still water,
brush plate can be raised, start water absorption electricity
Machine, push the washing machine, in the water area, repeated, multiple absorption.The
ground has deep grooves, which will affect the machine
Water absorption efficiency can only be separately treated.
8. Possible problems of water absorption gripper regulation:
When you feel in the process of using water suction
mechanical machine suddenly abnormal, water
suction pick can not absorb water or water
suction machine
If the voice is normal and the absorbent steak
cannot absorb water, you should immediately
stop the operation for inspection;
(1) If the water level has reached the highest position (lift to cut off the wind path), you will
discharge sewage;
