YZ-X5
10
3.4 Battery maintenance
The power system of this washing machine is powered by two 12V
maintenance-free lead-acid batteries in series, and the system voltage is 24V.
●When the machine works for a period of time, the battery power drops, when the
power display meter is lower than 21V, it means that the power is insufficient and
needs to be charged in time;
●When maintaining the battery, please wear protective gloves to avoid contact with
the acid substance of the battery;
● Check whether the battery connecting wire is worn and the contact parts are loose,
and replace it if necessary;
●The terminal of the battery should be kept clean and dry, and there should be no
sundries and dust covering it, which is extremely unfavorable to the battery, and will
burn the battery in severe cases.
Step 2: Attach Plastic Assembly to Squeegee Cast
Aluminum Base Plate;
Step 3: Align the holes of the rear rubber strip with
the plastic components of the squeegee to the
protrusions;
Step 4: Use both ends of the bead to snap
together;
Step 5: Tighten the Nuts.
! ! Notice
◆
In order to make the battery have a long service life, it should be charged in time
after the machine is finished, and deep discharge is strictly prohibited.
◆
The correct charging method of the lead-acid battery: first insert the battery, then
plug in the mains; when fully charged, first cut off the mains, and then pull out the
battery plug.
◆
If the machine is not used for a long time, please fully charge the battery,
disconnect the positive pole of the battery, and store it.
! ! Warn
During the use of the battery, the capacity of the deeply discharged battery will
decrease and the life span will be shortened.
