2
YZ-X5
Instruction Manual
Instruction Manual
The machine is packaged in five parts: fuselage (water tank, rack, brush plate fixing
assembly), suction pickling assembly,Brush plate, charger.
Machine installation and commissioning
1. Installation of water-absorbing pickles:
◆ Remove the package and take out the water-absorbing gripper assembly, as shown
in the figure below
Fix the suction head on the pendulum tail and tighten the cross handle
◆ Water absorption adjustment
2. If the suction scraper is pressed too low, the resistance is great
◆ Unscrew the setting screw of the small wheel with open head
◆ Reduce the roller, visually check the water absorption strip to the ideal position, and
tighten the screw;
◆ Repeat the above steps to the other pickpocket wheel and adjust the height to the
appropriate position;
3. Too high water absorption of the small wheel support rod is not effective
◆ Unscrew the support rod screw of the small wheel;
Water inlet
Summary of Contents for YZ-X6
Page 2: ...1 ...
