12
YZ-X7
Handling machine
When handling machines using a truck or trailer, always follow the following binding procedures:
1.
Raise the brush head to the handling position.
2.
Mount the machine using the recommended loading pad.
3.
Close the front of the machine in front of the truck or trailer. After the machine is
released, drop the brush head and turn the key to the closed position.
4.
Place obstacles at the rear of each drive wheel to prevent the machine from sliding.
5.
Attach the top of the machine to prevent tilt. You must install a carrier on the board
of the truck or trailer. For safety: When handling the machine: 1 Flat load the machine
from the truck or trailer and secure the machine to the board with ropes.
Storage machine
1.
Charge the battery before storage.
2.
Do not store with out of power.
3.
Dry the tank tank in the tank thoroughly and rinse. Store the machine in a dry place and
keep the brush head in the raised position.
4.
Open the sewage tank cover for good ventilation. NOTE: Do not let the machine in rain and store it
indoors.5. s like
5.
Store the machine in cold conditions, please do drain all the fluid inside the machine.
