background image

4

Matters needing attention

This machine is suitable for industrial and commercial use. It is specially used for
cleaning the hard floor in the room. It cannot be used for other purposes.
Please use the recommended cleaning MATS and brushes, as well as the floor cleaners
available on the market for this machine.
All operators must read, understand and follow the following safety precautions.
The following is a description of the safety warning symbols and "for safety" headings
used in this manual:
Warning: Used to warn of a risk or unsafe operation that could result in serious
personal injury or death.
To be on the safe side: To indicate what must be observed when using the machine to
ensure safety.
Failure to follow these warnings may result in personal injury, electric shock, fire or
explosion.

Warning: Fire or explosion danger:

Inflammable liquid shall not be used;
Do not operate the machine near or in places where flammable liquids, gases or dust
are present.
This machine is not equipped with explosion-proof motor.
Ifusedinplaceswithinflammablegas,liquidorash,theelectricmotorwillgenerate
sparks during starting and operation, which may lead to flash fire or explosion.
Do not pick up inflammable materials or active metals.
A battery emits hydrogen gas.
Stay away from sparks or open fires.
Keep the battery compartment open while charging.

Warning: Electric shock hazard.

Disconnect the battery before repairing the machine.

Warning: Swivel brush running.

Keep your hands away.
Please turn off the power before repairing the machine.

Summary of Contents for YZ-X8



















Reviews: