InstructionManual
YZ-X8
7
Note:Do not put the battery into the battery compartment to avoid damage to the
battery and themachine.
4. Beforeconnectingthe battery,pleasemake surethe electrodeandelectric terminal
are clean.
Use electrode cleaning fluid and wire brush as required.
Note:Applyathinlayerofmetal-freelubricatingoilorprotectivespraytothe
wiring to prevent battery decay.
5. After the electric bottle is finished, please check the power scale of the battery.
Charge the battery as needed.
Machine cleaning mode
Cleaning method:
Manually control the water valve to adjust the amount of water in the water tank and
the amount of detergent that flows to the ground.
The brush cleans the floor with a solution of detergent and water.
At the same time as the machine is moving forward, with water suction scraper will be
on the floor of the sewage suction tank.
Brush and hundred clean mat information
For best performance, use the correct brush type for cleaning.Recommended brushes
and clean pads are as follows:
Soft nylon brush, white
Itisrecommended thatthe coatedfloorbecleaned withoutdamaging thefloor.Clean
without scratches.
Polished pad, white
Used to maintain highly polished smooth or polished floors.
Cushion, red
Used for scrubbing slight dirt without harming the ground.
Gravity mat, black
Usedtoforciblyremoveheavycoatingorsubstrate,orforultrastrongscrubbing
