GENERAL SERVICE INFORMATION
4-16
TNV IDI Service Manual
Engine Oil
Figure 4-6
Adding Engine Oil
1. Make sure engine is level.
2. Remove oil cap
(Figure 4-6, (4))
.
3. Add indicated amount of engine oil at the top or
side engine oil filler port
(Figure 4-6, (5))
.
4. Wait three minutes and check oil level.
5. Add more oil if necessary.
6. Replace oil cap
(Figure 4-6, (4))
and
hand-tighten. Over-tightening may damage the
cap.
Engine Oil Capacity (Typical)
Note: These are the engine oil capacities
associated with a “deep standard” oil
pan. Oil capacity will vary dependant
upon which optional oil pan is used.
Refer to the operation manual provided
by the driven machine manufacturer for
the actual engine oil capacity of your
machine.
The following are the engine oil capacities for
various Yanmar TNV engines:
(4)
(5)
(1)
0000587C
(4)
(2)
(3)
Engine Model
Dipstick Upper
Limit/ Lower Limit
2TNV70(VM)
2TNV70(VH)
1.9 / 1.3 qt
(1.8 / 1.2 L)
2TNV70(CH)
2.3 / 1.3 qt
(2.2 / 1.2 L)
3TNV70(CL),
3TNV70(VM)
3TNV70(VH)
3.0 / 1.6 qt
(2.8 / 1.5 L)
3TNV70(CH)
4.0 / 2.2 qt
(3.8 / 2.1 L)
3TNV76(CL),
3TNV76(VM)
3TNV76(VH)
3.6 / 1.9 qt
(3.4 / 1.8 L)
3TNV76(CH)
4.7 / 2.4 qt
(4.4 / 2.3 L)
TNV_IDI_ServiceManual_A4.book 16 ページ ２０１２年２月２４日 金曜日 午前１０時２４分
