![background image](http://html.mh-extra.com/html/yanmar/3tnv-series/3tnv-series_service-manual_905550121.webp)
4. Disassembly, Inspection and Reassembly of Engines
106
(6) Tappet
Mainly check the tappet contact surface with the cam
and push rod. Slight surface defects shall be
corrected with an oilstone.
(a) Tappet stem outside diameter measurement
mm
4.4.6 Cylinder bore correction
1) Slight uneven worn, flawed, etc. shall be
corrected by honing only. If the cylinder is
unevenly worn partially, flawed or otherwise
damaged and cannot be repaired simply by
honing, rebore the cylinder first and then hone.
See 4.4.5.(1)(c) for the boring dimension.
2) Items to be prepared for honing
Flex-Hone
(see No.8 of 4.1.2 in Chapter 4)
Electric drill
Honing fluid
(50:50 mixture of lube oil and diesel oil)
Model Item Standard
Limit
Tappet
hole I.D.
12.000 12.025 12.045
Stem O.D. 11.975 11.990 11.955
TNV82A 88
Clearance 0.010 0.050 0.090
Tappet
hole I.D.
12.000 12.018 12.038
Stem O.D. 11.975 11.990 11.955
4TNV94L 98
Clearance 0.010 0.043 0.083
Tappet
hole I.D.
14.000 14.018 14.038
Stem O.D. 13.966 13.984 13.946
4TNV106(T)
Clearance 0.015 0.052 0.092
Summary of Contents for 3TNV Series
