![background image](http://html.mh-extra.com/html/yanmar/3tnv-series/3tnv-series_service-manual_905550138.webp)
8. Turbochager
8.3 Periodic Inspection Procedure
8.3.1 Periodic inspection intervals
Periodically inspect the turbocharger for the overall conditions and fouling.
The inspection interval varies with the operating conditions, but refer to the table below for the guideline
for each application.
Application Inspection
interval
For vehicles (automobiles)
Every 6 months
or 60,000km
Every 12 months
or 150,000km
Every 24 months
or 300,000km
For construction machinery
Every 6 months
or 500hrs
Every 12 months
or 1,000hrs
Every 24 months
or 2,000hrs
For faming machinery
Every 6 months
or 200hrs
Every 12 months
or 400hrs
Every 24 months
or 800hrs
For marine use
Every 6 months
or 1,500hrs
Every 12 months
or 3,000hrs
Every 24 months
or 6,000hrs
Rotor rotation
Rotor play
Overhaul and overall
inspection
Oil filter cleaning and
inspection
Engine oil replacement
Based on engine operation manual
123
Summary of Contents for 3TNV Series
