![background image](http://html.mh-extra.com/html/yanmar/3tnv-series/3tnv-series_service-manual_905550066.webp)
2. Inspection and Adjustment
2.6 Radiator cap inspection
Install the radiator cap on the cap tester. Set the
tester pressure to 0.09 0.015MPa (0.9 0.15kgf/cm
2
)
and see that the cap is opened. If the cap does not
open, replace the cap since it is abnormal.
2.7 Thermostat Inspection
Place the thermostat in a container filled with water.
Heat it while measuring the water temperature, and
see that the thermostat is actuated at temperature of
following table.
Model
Valve opening
Temperature
(deg C)*
Full open lift
(Temperature)
(mm)
All models
69.5 72.5
8 or more (85deg C)
* Valve opening temperature is carved on the flange.
51
Summary of Contents for 3TNV Series
