COOLING SYSTEM
3TNV88F Service Manual
8-11
Engine Coolant Pump
Figure 8-14
6. Reinstall the V-belt. Tighten the V-belt to the
proper tension.
7. Reinstall and tighten the drain plug or close the
drain cock in the radiator. Reinstall and tighten
the engine block drain plug or reconnect the
coolant hose at the oil cooler.
8. Fill the radiator and engine with engine coolant.
See Drain, flush and refill cooling system with
new coolant on page 5-20.
NOTICE
• Only use the engine coolant specified. Other
engine coolants may affect warranty
coverage, cause an internal buildup of rust
and scale and/or shorten engine life.
• Prevent dirt and debris from contaminating
the engine coolant. Carefully clean the
radiator cap and the surrounding area before
you remove the cap.
• Never mix different types of engine coolants.
This may adversely affect the properties of
the engine coolant.
K0000584
2
1
3TNV88F_SVM_A4.book 11 ページ 2012年7月26日 木曜日 午後6時4分