![background image](http://html.mh-extra.com/html/yanmar/6cxm-gte2/6cxm-gte2_operation-manual_905594024.webp)
Be sure to check the alarm devices and other
instruments on the panel before and after starting
the engine. If the devices are not working properly,
it is impossible to prevent any problems arising from
insufficient oil and water in the engine. Make it a
regular practice to check the alarm and other devices
before and after starting.
4.2.1 Checking the Instrument Panel
Lamps
(Instrument panel is optional)
Turn on the light switch on the upper right side of the
instrument panel and check to see that the panel lights
switch on.
4.2.2. Checking the Alarm Devices
(1) Check before starting.
1
Turn on the battery switch.
2 Put the key in the starter switch.
3 Turn the key from the OFF position to ON and
check to see that the alarm devices as shown in the
diagram (Before Starting) are working properly.
• Buzzer sounds.
• Charge and other lamps light up.
(2) Check after starting.
When the key returns from the START position to ON,
check to see that the alarm devices as shown in the
diagram [After Starting] are working properly.
• Buzzer stops.
• All of the lamps switch off.
By performing these procedures, it can be determined
whether or not the electric circuit is in good working
order. If there is any problem, consult your Yanmar
dealer.
See 2.4.1 (2)
How to Operate
4
24
|
MARINE DIESEL ENGINE 6CXM-GTE2
>
4.2 Checking the Instrument Panel and Alarm Devices
Function of Alarm Devices
Before After
Key Operation Starting Starting
OFF
START
ON
ON
Alarm Buzzer
On Off
Alarm Lamps
Charge Lamp
On Off
Cooling Water Temperature
On briefly Off
Engine Oil Pressure
On Off
Engine Oil Filter
On briefly Off
Note: The amount of time for ‘On briefly’ is approx. 3 seconds.
Summary of Contents for 6CXM-GTE2
Page 49: ...President Yanmar Marine Int l ...
Page 50: ...President Yanmar Marine Int l ...