![background image](http://html.mh-extra.com/html/yanmar/6cxm-gte2/6cxm-gte2_operation-manual_905594026.webp)
4.3.1 Normal Starting
Follow the following procedures for starting under
normal conditions.
1 Open the Kingston cock.
2 Open the fuel tank cock.
3 Cut off all clutches and main switches for all auxiliary
machinery so there is no load.
4 Put the remote control handle in
NEUTRAL
.
5 Set the governor handle in the low speed position
6 Turn on the battery switch.
7 Insert the key into the starter switch and turn it to
ON
, the buzzer sounds and the alarm device lamps
switch on, indicating that the alarm equipment is
working properly.
8 Turn the key to
START
to start the engine. When the
engine has started, remove your hand from the key.
The key will automatically return to the
ON
position.
Check to see that alarm lamps have switched off
and the buzzer has stopped.
(See 4.2.2)
How to Operate
4
26
|
MARINE DIESEL ENGINE 6CXM-GTE2
>
4.3 Starting
Remove hand after
engine starts
Stop position
Drive position
Starting position
Summary of Contents for 6CXM-GTE2
Page 49: ...President Yanmar Marine Int l ...
Page 50: ...President Yanmar Marine Int l ...