![background image](http://html.mh-extra.com/html/yanmar/6cxm-gte2/6cxm-gte2_operation-manual_905594030.webp)
Stop the engine in accordance with the following
procedures:
1 Stop the boat. Put the remote control handle in
NEUTRAL
and reduce the engine speed to the
lowest speed.
2 Be sure to race the engine before stopping it.
See 4.5 (7)
3 Cool down the engine at low speed (1500rpm or
lower) for about 5 minutes.
4 Continue to push the stop button until the engine is
completely stopped. If you release the button before
the engine has completely stopped, it may restart.
5 Turn the starter switch to
OFF
, remove the key and
place it in a safe place.
6 Cut off the battery switch.
7 Close the fuel tank cock.
8 Close the Kingston cock.
In the rare instance that the engine does not stop
when the stop button is pushed, stop the engine by
closing the fuel cock on the fuel tank.
Stopping the engine suddenly after
operating at high speed or heavy loading without
cooling down operation. It will cause the engine
temperature to raise quickly resulting in deterioration
of the lube oil and sticking of parts.
Neglecting to close the Kingston cock will
allow water to leak into the boat and may cause it to
sink. Be sure to close the cock.
How to Operate
4
30
|
MARINE DIESEL ENGINE 6CXM-GTE2
>
4.6 Stopping the Engine
��������
��������
Summary of Contents for 6CXM-GTE2
Page 49: ...President Yanmar Marine Int l ...
Page 50: ...President Yanmar Marine Int l ...