![background image](http://html.mh-extra.com/html/yanmar/b95w/b95w_operating-instructions-manual_905633034.webp)
B95W
Safety
32 / 306
3
03_Sicherheit_en.fm - V 0.1 - 1.8.17
46
3.8
Hazard zone
Fig. 3-4 Working and danger zones
1
Surrounding area
2
Hazard zone
3
Working zone
4
Close range where there is a high risk of collision
Nobody must be allowed to remain in the danger zone of machines. The plant
operator is required to fence off the danger zone.
The danger zone encompasses the area around the machine in which persons
may be injured by its movements during operation, its loading equipment and
attachments, or by any loads that may fall or be flung out.
The machine operator is only to work the machine if nobody is in the danger
zone.
The machine operator must give a warning signal to persons who may be in
danger.
Stop work with the machine, if persons remain in the danger zone despite the
warning.
To ensure no danger of crushing, a sufficient safety distance (min. 0.5 m)
must be kept from solid objects, e.g., buildings, excavation slopes, scaffolding,
other machines, etc.
If the safety distance cannot be kept, fence off the area between solid
construction elements and the working zone of the machine.
If conditions are such that the machine operator’s view of the driving and
working zone is restricted, he must be guided or the driving and working zone
must be secured by means of a solid barricade.
The machine should only be operated if the site that is being driven and
worked in is sufficiently lit.
1
4
3
2
6
Summary of Contents for B95W
