PERIODIC MAINTENANCE
JH Series Operation Manual
121
Checking and Adjusting Remote
Control Cables
Adjusting Engine Speed Remote
Control Cable
Ensure the control lever on the engine side
moves to the high-speed stop position and
low-speed stop position when the remote
control lever is moved to HIGH and then to
LOW.
Figure 3
Figure 7
1 – Cable
2 – High-speed stop position
3 – High-speed stop pin
4 – Control lever
5 – Low-speed stop pin
6 – Low-speed stop position
7 – Adjustment screw
1. To adjust, loosen the adjustment screw
(Figure 7, (7))
for the remote control
cable and adjust.
2. Adjust the low-speed stop position
(Figure 7, (6))
first and then adjust the
high-speed stop position
(Figure 7, (2))
, with the adjustment
screw on the remote control lever
(Figure 7, (4))
.
Adjusting Marine Gear Remote Control
Cable
KM35P
Figure 8
KMH4A
Figure 9
1. Ensure that the remote control lever
(Figure 8, (2))
or
(Figure 9, (2))
moves
to the correct position when the remote
control handle is in the NEUTRAL,
FORWARD and REVERSE positions.
Use the NEUTRAL position as the
standard for adjustment.
2. To adjust, loosen and retighten the
cable fitting
(Figure 8, (1))
or
(Figure 9, (1))
.
061301-01X00
1
2 3
4
5
6
7
026101-00X01
1
2
3
057453-00X00
1
2
3
3JH40_4JH45_4JH57_4JH80_4JH110_EN_OPM.book 121 ページ ２０２２年９月２２日 木曜日 午後６時１７分
