![background image](http://html.mh-extra.com/html/yanmar/rt70/rt70_operators-manual_905645105.webp)
Microtrench - 104
RT70 Operator’s Manual
Set Up
Set Up
1. MT12: Before first use and after changing bits, check bit clearance. See “Check Bit Clearance” on
2. Fasten and adjust seat belt.
3. Start engine.
4. Raise microtrencher.
5. Drive to starting point and move in line with planned trench.
6. Lower backfill blade.
7. Set parking brake.
8. MT12: Adjust spoils deflector. See “Spoils Deflector” on page 106.
9. MT12: Lower microtrencher to just above ground and adjust tilt. See “Adjust Tilt” on page 107.
MT16: Lower microtrencher base to ground.
10. Ensure blade is in line with planned trench and that tires are pointing straight ahead.
11. MT12: Adjust level indicator.
12. Prepare spoils removal. See “Prepare Spoils Removal” on page 108.
13. Shut off machine.
Summary of Contents for RT70
