![background image](http://html.mh-extra.com/html/yanmar/rt70/rt70_operators-manual_905645108.webp)
RT70 Operator’s Manual
Microtrench - 107
Set Up
Adjust Tilt
MT12 only
1. Lower microtrencher.
2. Loosen four clamp bolts (2, and two on other
side of mount).
3. Adjust manual adjustment turn screw (1) and
watch bubble level (3) until desired tilt is
achieved.
4. Tighten clamp bolts.
Adjust Level Indicator
MT12 only
1. Remove blade.
2. Position base of microtrencher flat on
pavement.
3. Loosen bolts (1) in adjustable link and align
moving pointer (2) with fixed pointer.
4. Tighten bolts.
IMPORTANT:
Microtrenching requires good
contact between microtrencher frame and the
surface being cut. Lift, level and tilt
microtrencher to match jobsite conditions.
Summary of Contents for RT70
