![background image](http://html.mh-extra.com/html/yanmar/rt70/rt70_operators-manual_905645167.webp)
Maintenance - 166
RT70 Operator’s Manual
Tractor Procedures
Seat Belt
Check every 2000 hours. Replace any worn or
damaged components.
Buckle and Latch
Check that buckle and latch (1) are not broken or
corroded. When inserting the latch into the
buckle, the latch should insert smoothly until an
audible click is heard. Latch should not release
when the seat belt is tugged.
Webbing
Check seat belt webbing (2) to ensure that it is
not cut, frayed, or showing signs of extreme or unusual wear. Check the area near the buckle and latch
and anywhere the seat belt has contact with equipment or seat.
Retractor
Check that the retractor (3) operates smoothly when the belt is pulled and released. Retractor should
spool belt without locking.
Mounting Hardware
Check the seat belt mounting hardware (4) on both sides of the seat to ensure it is tight. Replace missing,
damaged, or corroded bolts.
Tires
Check pressure (1) before each use and every 10
hours. Inflate as indicated below:
• 19.0/45-17 tire: 50psi (3.5bar)
Check lug nuts (2) and tighten to 295ft•lb
(400N•m).
1
1
33
22
44
t63om041h21.eps
t63om041h21.eps
1
1
22
t63om042h21.eps
t63om042h21.eps
Summary of Contents for RT70
