![background image](http://html.mh-extra.com/html/yanmar/sk1050/sk1050_operators-manual_905495088.webp)
SK1050 Operator’s Manual
Service - 87
Procedures
Pressure Gauge Adjustment
Check
1. Lift track.
2. Remove gauge (1) from stored location.
3. Thread gauge into connection (2).
4. Track is correctly tensioned when gauge
measures 700-900psi (48-62bar).
Adjust
1. Lift track.
2. Remove gauge from stored location.
3. Thread gauge into connection.
4. Adjust tension.
• To tighten, pump MPG into grease zerk until gauge measures 700-900psi (48-62bar).
• To loosen, remove plug and drain all grease. Then follow tightening procedure.
5. Start engine.
6. Drive forward one machine length and check track tension.
1
2
t53om032w20.eps
Summary of Contents for SK1050
