7. ADJUSTMENT AND REPAIR
7-2-4
7-2-3 Removal and Reinstallation of Crawler
When raising the machine, support it with safety blocks of sufficient strength.
When loosening or removing the nipple valve
1
, the high internal pressure could cause grease to eject or the nipple valve
to blow. Do not bring your face close to the nipple valve
1
.
1) Removal of Rubber Crawler
Handle the rubber crawlers with great care, because they are heavy.
Rubber crawler : 59 kg each
2) Reinstallation of Rubber Crawler
Install the rubber crawler in the reverse order of the removal procedure.
Procedure
(1) Lower the bucket to the ground. Loosen the nipple valve
1
and discharge the grease from the grease cylinder to
loosen the rubber crawler tension.
Note :
Move the machine back and forth if the grease is not dis-
charged smoothly.
(2) Swing the upperstructure to position the implement on the
side of the rubber crawler to be removed, and raise the
machine slightly with the implement.
(3) Insert steel pipes between the crawler frame and the rub-
ber crawler
2
, as shown in the figure at the right, and turn
the sprocket in the reverse direction. Slide the rubber
crawler off when the rubber crawler is separated from the
idler by the steel pipes.
!
!
!
Rubber crawler
to be removed
Rotating direction
Steel pipes
Summary of Contents for ViO12-2A
