6 M
AINTENANCE BY THE OPERATOR
6.1 Daily maintenance
6.1.1 Checking the machine before use
• Before each use of the machine, visually check the following :
– No missing, broken or loose parts
– Ventilator belt correctly tightened
– No oil, water or fuel leaks
– Engine and battery in good condition
• To detect leaks, wear protective goggles and thick gloves. Use a piece of card or plywood
to detect leaks/sprays of hot oil. Consult a doctor immediately if you are hit with any oil.
• Also check that the time counter, the headlights, the alarm and the lights are working
correctly.
• If an element is not working or you think it is defective, shut down the machine's engine
immediately and contact your dealer.
6.1.2 Checks after using the machine
After each use, several checks must be carried out according to how the machine is used ; refer
to chapter :
6.1.3 Checking the commands
• Operate the commands.
• Release the levers, they should return to neutral position themselves.
• If they do not, contact your dealer.
6.1.4 Checking the seat
Check that the safety belt is present and in good condition.
141
Summary of Contents for ViO38-6
