3. Lubricants
YT3 SERIES Maintenance | YT347, YT359
No.
Locations
Capacities
Lubricants
Unit
YT347
YT359
1.
Coolant*
L
6.2
7.6
High Quality Permanent Type Antifreeze (Ethylene Glycol with
corrosion and rust inhibitor chemicals)
Coolant Mixture Ratio
Distilled Water 50%: Antifreeze 50%
2.
Engine crankcase (with filter)
L
6.6
7.6
ACEA Service Categories E3, E4, or E5
SAE 10W-30 or SAE 10W-40
3.
Transmission hydraulic oil
L
29
Hydraulic/Transmission Fluid (TF500A)
4.
Front axle case
L
9.0
SAE 80W-90 gear oil
5.
Greasing
Front axle pivot No. of greasing point
2
Until grease overflows
NLGI GRADE No.2
Tie rod end
No. of greasing point
2
Until grease overflows
NLGI GRADE No.2
Lift link
No. of greasing point
1
Until grease overflows
NLGI GRADE No.2
(Specifications and design are subject to change without prior notice for improvement.)
*Immediately after purchasing the tractor:
• adjust the coolant mixture ratio of the coolant and water to suite the local climate
•
the preceding practice assists in making the tractor function efficiently
The coolant can remain unchanged for a period of 2 years if during the period the tractor is operated for less than 2000 hours. if the tractor is operated for
more than 2000 hours during the period, the coolant has to be replaced during flushing of the system. After pouring the coolant, run the engine for a short
period to mix the two fluids thoroughly.
This documentation
is for informational
purposes only and
subjected to change.
Always check YDS for
the latest version.
YT347/YT359 Spare
parts catalogue download
YT347/YT359 Maintenance
Kits download
YT347/YT359 Service
manual download
1.
2.
3.
4.
Type & Description
Change int. (h)
Size
Order no.
YT347 / YT359
10W-30 Engine oil*
200
5 L
10W30-5L
20 L
10W30-20L
208 L
10W30-208L
TF500A Transmission & hydraulic fluid*
600
20 L
TF500A-20L
80W90 Gear oil
300
1 L
80W90-1L
20 L
80W90-20L
Grease-calcium
50
400 gr
GREASE-CALCIUM
Coolant**
1000/ 2 years
1 L
COOLANT-1L
5 L
COOLANT-5L
20 L
COOLANT-20L
208 L
COOLANT-208L
YANMAR GENUINE LUBRICANTS & COOLANTS
*First lubricant change is at 50 hours ** Hours interval or time apply, whichever comes first
