3.2.6 Automatic accumulation
At weighing mode, press
+
together, indicator performs automatic accumulation,
and accumulating light flashes. At automatic accumulation mode, while the weight value is
large or equal to 20 counts and the value keeps stable for 1-2 seconds, indicator performs
one time automatic accumulation, displaying accumulation times and amount.
Note: The accumulating amount is not recorded under automatic accumulating
mode when power off.
3.2.7
At weighing mode, press
to delete the accumulation times and amount.
3.2.8 Kg/lb diversion
At weighing mode, press
+
together, indicator performs unit diversion; while the
unit is lb, the final decimal of the displaying value is lighted.
Note: once you operate accumulating and fail to delete the accumulation amount at one of
the unit, unit diverting is not allowed ,unless you delete the accumulation amount
3.2.9 preset tare
At weighing mode, press
+
together, indicator performs tare presetting.
The procedure is as follows:
Step Operation
display Explanation
1
[ ****** ]
Weighing display
2
Press
+
[P00000]
Remind to input preset tare
3
Input preset tare, eg “6000”
[ 6000]
Press
6 times to change the
lowest digit to “6”, and then press
3 times to set the value as
“6000”, and press
to confirm
4
[
******]
Turn back to weighing mode,
displaying the net weight of
deducting tare
3.2.10 Automatic dormancy
Indicator keeps at stable mode for 2 minutes and no any operating and weighing, it will
turn to automatic dormancy, meanwhile the final decimal is lighted. Any operating and
weighing will arouse it to working mode.
6
