18
19
TECHNICAL DATA
Model
LB C20
Mains voltage
40 V , 2.0AH
max. blow speed
200 km/h
Bag content
45 l
Mulch ratio
8:1
Weight
3.15 kg
Sound pressure level: LpA*
75.8 dB(A) K=3 dB(A)
Sound power level: LwA**
95.3 dB(A) K=3 dB(A)
Vibration front handle
4 m/s
2
K=1.5 m/s
2
Battery pack Model
B0P-SP07-20-C
Battery capacity
20 V , 2.0 Ah
Battery charger Model
VDE: B0Q-SP07-2040ZA
BS: B0Q-SP07-2040ZB
Input
220-240V AC, 50/60Hz 110 W
Output
21 V , 4 A
Protection class
II
*) The specified values are emission values and do not necessarily represent safe workplace
values. Although there is a correlation between emission and immission levels, this cannot be
used to infer whether additional safety measures are necessary or not.
Factors which affect the current immission levels at the workplace, include the type of room,
other sources of noise, e. g. the number of machines operating and other processes taking
place in the vicinity. Permitted workplace values can differ from country to country. This
information is designed to help the user to better assess the dangers and risks. Determination
of noise emission values in accordance with EN 60745-1.
**) The specified vibration emission value was measured in accordance with a normed test
procedure and can be used in order to compare one tool with another. The specified vibration
emission value can also be used for an introductory evaluation of the exposure. The vibration
emission value may fluctuate from the specified value during actual use of the power tool.
These fluctuations will depend on the way in which the power tool is used.
Try to keep vibrations to a minimum. One method of reducing the vibration load is, for
example, limiting the length of time you work with the tool. All parts of the operating cycle
must be taken into account for this purpose (for example, also including times in which the
power tool is switched off and times in which it is switched on, but is running without load).
Determination of vibration emission values in accordance with EN 60745-1.
DESCRIPTION OF PRODUCT
Parts description (Fig. A)
1. Rollers
2. Blower nozzle
3. Suction tube
4. Grip for front hand
5. On/Off switch
6. Grip for rear hand
7. Battery pack
8. Adjustment lever (blowing, vacuuming)
9. Collection bag
Delivery contents (Fig. B)
Carefully unpack the appliance and check that it is complete. Dispose of the packaging
material correctly.
a. Original Instructions
b. Cordless Blower/Vacuum
c. Collection bag
d. Shoulder strap
e. Battery pack x2
f. Charger
WARNING:
If any parts are damaged or missing, do not operate this tool until these
parts are replaced. Failure to heed this warning could result in serious personal
injury.
NOTE:
Always recycle the packaging in accordance with local recycling guidelines.
