background image

12

13

PRODUCT SAFETY WARNINGS

PRODUCT SAFETY WARNINGS

• When working with the device, always maintain a safe 

distance and natural body position.

• Always hold the device firmly in both hands.

• Before starting to work, check the working area for 

animals and objects. Remove all objects that may be 

slung away or become jammed in the cutting tool.

• Do not attempt to remove materials to be vacuumed

or to hold material already vacuumed when the motor 

is running. Only remove any jammed material to be 

vacuumed when the device is switched off.

• No other persons or animals may be present within an 

area of 15 m around the vacuuming area, as they may 

otherwise be injured by objects being slung away.

• Only work in well lit conditions where visibility is good.

• Do not work above head height! Do not lean forward

or back!

• The operator must wear tightly fitting clothing. Avoid 

wearing loose clothing. Wear sturdy shoes and long 

trousers.

• Take care when walking backwards. Danger of 

stumbling!

• Never work in the rain.

• Vacuuming or blowing of heavy materials such as metal, 

stones, branches, fir cones or broken glass is expressly 

forbidden.

• Keep all parts of your body away from the vacuum

opening.

• When working with the device, ensure that there is 

sufficient lighting.

• Always wear the required personal protective 

equipment.

• Be careful of the dust you have raised and flying 

objects. Especially dangerous is the rebound effect on 

walls.

• Do not direct the device at people or animals when 

vacuuming or blowing.

• Before starting to blow, loosen foreign bodies with a 

rake or broom.

• The machine may only be operated during sensible

hours – not too early in the morning or too late in the 

evening, as it may disturb other people.

• The times listed by the local authorities must be 

adhered to.

• The whole blower nozzle piece must be used so that 

the airstream can work close to the ground.

• Be aware of children and pets, close the windows and 

blow the foreign bodies safely away.

• Remember that moving parts may also be located 

behind ventilation and venting slots.

• Symbols which are on your device may not be removed 

or covered. Notes on the device which are no longer 

legible must be replaced immediately.

Summary of Contents for LB C20W












Reviews: