21
Dry vacuuming
Risk of injury!
Do not use a wet or damp device for dry vacuuming!
1. Insert the HEPA filter cartridge 20 (see chapter Inserting the HEPA filter cartridge).
2. Connect the suction hose and the accessories (see chapter Connecting the suction hose
/ accessories) Floor suction: Connect suction tube 15 and the wide nozzle with rubber
lip and brush 18. Suction at table height or in tight spaces: Do not connect a suction
tube 15 or a suction tube 15 and the crevice nozzle 23. If necessary, use a fine dust bag
14 (see chapter Filters).
3. Hold the suction hose 16 tight.
4. Switch on the device (see chapter Switching on the device).
5. Vacuum the area to be cleaned.
6. Switch off the device (see chapter Switching off the device).
Wet vacuuming
Risk of injury!
Switch off the device immediately if liquid or wet dirt emerges from the housing.
1. Insert the foam filter 21 (see chapter Inserting the foam fi lter). Floor suction: Connect
suction tube 15 and the wide nozzle with rubber lip and brush 18. Suction at table height
or in tight spaces: Do not connect a suction tube 15 or a suction tube 15 and the crevice
nozzle 23.
2. Hold the suction hose 16 tight.
3. Switch on the device (see chapter Switching on the device).
4. Vacuum the area to be cleaned.
5. Switch off the device (see chapter Switching off the device).
6. Clean the device and the accessories (see chapter Cleaning after wet vacuuming).
Blow function
1. Remove all filters from the device (see chapter Filters).
2. Connect the suction hose 16 with the suction hose connector in the hose connection of
the motor head 2 until it audibly clicks into place. Connect suction tube 15 and / or the
crevice nozzle 23 as required.
3. Hold the suction hose 16 tight.
4. Switch on the device (see chapter Switching on the device).
5. Blow off an area or objects.
6. Switch off the device (see chapter Switching off the device).
7. Connect the suction hose (see chapter Connecting the suction hose).
OPERATION
