16
17
CLEANING
TROUBLESHOOTING
Caution!
Protect the product from direct contact with water, and
make sure that water doesn't get the opportunity to get in.
• Always clean the product thoroughly after each use with a damp cloth,
sponge or brush.
• Avoid oil and grease contamination (especially to gripping parts).
If contamination should occur, wipe the product with a damp cloth
moistened with soapy water.
• Never use aggressive cleaning agents, solvents or chemicals for cleaning
Permanent damage to plastic parts could occur.
STORAGE
• Store the machine out of reach of children.
• Don't store the product in direct sunlight for long periods.
• For safety reasons worn or damaged parts should be replaced.
• Store in the original packaging (if possible) in a clean, dry, dark and frost-
free place protected from dust and out of reach of children.
• Cover unit with a suitable protective cover that does not retain moisture.
Do not use sheet plastic as a dust cover. A nonporous cover will trap
moisture around the machine, promoting rust and corrosion.
• The ideal storage temperature is between 5 and 30 °C.
DISPOSAL
• Dispose your device, accessories and packaging in accordance with the
requirements of environmental protection into the recycling collection
center.
• This machine does not belong to the household waste. Save the
environment and take this device to designated collection points where
it will be received for free. For more information please contact your local
authority or nearest collection point. Improper disposal may be punished
according to national regulations.
• The battery contains toxic Substances. Toxic materiaIs must be disposed
of in a specified manner in order to prevent contamination of the
environment. Take used batteries to a recycling center. Do not throw the
battery into household waste, fire or water.
Problem
Failure
The device was recharged, the
charging LED signalled but there was
no change in status even after several
hours.
Defective charger
The four blue status LEDs are lit
during charging, indicating that the
battery is fully charged. However,
when the unit is removed from the
charger and the power button is
pressed, the status LEDs indicate a
low or flat battery.
Defective battery
