background image

4

5

INTENDED USE

This product is exclusively intended for the use as a mobile light beamer for 
limited time in dry indoor and outdoor areas as a helper in starting motor 
vehicles this flashlight has not been designed for use on vehicles according 
to the corresponding descriptions and safety instructions in these operating 
instructions Any other use is not as intended.
If the product is used for any purpose other than the intended purpose or 
if unauthorized modification is made, the statutory warranty and statutory 
responsibility for defects as well as any liability on the part of the manufacturer 
will be void.
Please keep in mind that our products are not designed for commercial, trade 
or industrial use according to their intended purpose. We accept no liability if 
the product is used in these or comparable conditions.

GENERAL SAFETY INFORMATION

WARNING:

 PLEASE READ THE OPERATING 

INSTRUCTIONS! Read all instructions before 

operation. Pay special attention to safety instructions.

FAILURE TO FOLLOW THE INSTRUCTIONS AND 

FAILURE TO RESPECT SECURITY MEASURES MAY 

RESULT IN DAMAGE OF THE PRODUCT OR SERIOUS 

INJURIES.

 

- The user is liable for all damages caused to third parties 

or their property.

 

- Keep these instructions manual and use them whenever 

you need more information. If you don't understand 

some of these instructions, contact your dealer. If the 

product is lent to another person, it is necessary to lent 

this instruction manual with it.

Training

All operating personnel must be adequately trained in use, 

operation and setting and especially familiar with prohibited 

activities.

PRODUCT SAFETY INFORMATION

 

- Never look into the LED beam. There is a risk of dazzling 

yourself and causing damage to the retina of the eye.

 

- Do not direct the light beam at persons or animals and 

do not stare into the light beam yourself (not even from a 

distance).

 

- Do not shock or disassemble the flashlight. Do not 

attempt to replace the LED bulbs!

 

- If the protective glass is cracked or broken, it must be 

replaced before the work light can be used again.

 

- Do not use flashlight in the rain, bad weather or in a 

moist environment.

 

- This flashlight has not been designed for use on vehicles 

and is not approved for illumination in road traffic.

 

- Keep handles dry, clean, free from oil and grease.

 

- The use of any accessory of attachment or performance 

of any operation with this tool other than those 

recommended in this instruction manual may present a 

risk of personal injury and/or damage to property.

 

- Use only spare parts and components, which the 

manufacturer delivers and recommends.

 

- Never put into water.

 

- If the device has been dropped or damaged by impact, 

fall, etc., always have it checked and if necessary, 

repaired by qualified service staff.

 

- Never disassemble the device.

 

- Never leave the device in a fully discharged state for a 

long time. The battery may be permanently damaged 

and the damage may be permanent. When not in use, 

recharge the device every three months.

Summary of Contents for LX JS12













Reviews: