background image

6

7

Danger of Lithium batteries 

Lithium batteries have high energy density and provide 

high performance in their application Therefore, all safety 

instructions must be followed carefully when using, charging 

and storing lithium batteries. Due to their performance, all 

lithium batteries are potentially hazardous when damaged 

or used improperly, and may pose a serious RISK OF FIRE, 

for example, there is a risk during charging in these cases:

 

- Battery was fully discharged and was not recharged in 

a short time. - Lithium batteries should be recharged 

within 24 hours after use, especially if they have been 

completely or nearly flat.

 

- Charging is performed at temperatures below 4 °C. 

- Charging below 4 °C causes a chemical reaction in 

the battery cells which can cause permanent damage, 

explosion or fire during charging

 

- Battery was in contact with liquid. (Salt water is 

especially risky.)  

 

- Exposure to liquids can cause internal corrosion, cell 

damage or internal battery management system (BMS). 

BMS protects the battery from overcharging, deep 

discharge, or unbalanced cell charging. Therefore, a cell 

or BMS failure may present a risk of fire during charging

 

- Operating or charging a battery that has been damaged 

by dropping or shipping. 

 

- If a crack or any mechanical damage occurs on the 

battery cover, the battery must not be used or charged.

 

- Use of a charger other than the original one (supplied 

with the device)

 

- Each battery chargers charges specific voltage, current 

and has some other specific parameters to manage 

the charging of the battery. These parameters will vary 

significantly when using a different charger (for example, 

for different types of batteries - SLA, NiCd, NiMH, etc.). 

PRODUCT SAFETY INFORMATION

Therefore, never use any charger other than the one 

supplied with the device. Do not use for charging dry 

cells that are commonly used in household appliances. 

These batteries may break and cause personal injury 

and damage to property.

 

- NEVER LEAVE THE DEVICE ON DIRECT SUN OR IN 

PLACES WITH HIGH TEMPERATURE (temperature 

above 50 °C / e.g. behind car window in summer)!!!

 

- Temperature higher than the critical limit can result in 

overheating of lithium batteries, their explosion and 

subsequent flare-up. This warning applies generally to 

ALL devices in which lithium batteries are used.

Service

 

- Do not attempt to repair the device yourself. Any work 

not listed in this manual MAY BE PERFORMED ONLY BY 

AUTHORIZED SERVICE CENTRES.

 

- Have your power tool serviced by a qualified repair 

person using only identical replacement part s. This will 

ensure that the safety of the power tool is maintained.

PRODUCT SAFETY INFORMATION

Summary of Contents for LX JS12













Reviews: