background image

8

9

Always wear safety gloves when operation.

Due to their performance, all lithium batteries are 

potentially hazardous when damaged or used 

improperly, and may pose a serious RISK OF FIRE.

Do not discard electrical appliances with household 

waste.

Product conforms to relevant EU standards.

Batteries contain Li-ion. Do not dispose of waste 

batteries in domestic waste. Contact local authority 
to find out how to dispose of batteries.

A product placed on the United Kingdom market 

meets the UKCA Marking requirements

SYMBOLS

Safety symbols

The purpose of safety symbols is to attract your attention 

to possible dangers. The safety symbols and the 

explanations with them require your careful attention 

and full understanding. The symbol warnings do not, by 

themselves, eliminate any danger. The instructions and 

warnings they give are no substitutes for proper accident 

prevention measures.

WARNING:

 Be sure to read and understand all safety 

instructions in this operator’s manual, including 

all safety alert symbols such as “

DANGER,

” 

WARNING,

” and “

CAUTION

” before using this tool. 

Failure to follow all instructions listed below may 

result in electric shock, fire and/or serious personal 

injury.

SAFETY ALERT SYMBOL

: Indicates 

DANGER

WARNING

, or 

CAUTION

. May be used in conjunction 

with other symbols or pictographs.

Symbol meaning

This page depicts and describes safety symbols that may 

appear on this product. Read, understand and follow all 

instructions on the machine before attempting to assemble 

and operate.

To reduce the risk of injury, user must read the 

instruction manual carefully.

Do not store or use the battery in locations where 

the temperature may reach or exceed 50 °C.

Always wear safety glasses when working with 

batteries. Use eye protection.

TECHNICAL DATA

Model 

LX JS12

Degree of protection

IP54

Battery capacity

3x4000mAh, 11.1V DC Lithium 

41.07Wh

Output (USB1, USB2)

5 V    ,  max 2.1 A

Output 12V OUT

12 V    , max 8 A

Jump start connection (JUMP START)

500 A, only for use with the “SMART 

JUMPER” jump start cable

INPUT (USB type A)

5 V    ,  2 A

INPUT (Car cigarette lighter)

12 V    ,  2 A

Fuse (Car cigarette lighter)

F2AL250V  

Weight

0.48 kg

SYMBOLS

Summary of Contents for LX JS12













Reviews: