6
7
Overview
The illustration of the principal functioning parts can be found on the front and
back foldout pages.
1 Robomower x 1
2 STOP button
3 Display and keypad
4a: Charging contacts (Robomower)
4b: Charging contacts (charging station)
5 Charging station x 1
6 Blade (3 per each)
7 Blade holder
8 Front wheel
9 Rear wheel
10 Carrying handle with safety switch
11 Main power switch
12 Control panel
13 Transformer x 1
14 Extension cord x 1
15 Fixing peg x 200
16 Measurement ruler (on the color box) x 2
17 Boundary wire connector x 3
18 Boundary wire x 1 (150m)
19 Cement resistance x 1
Functional description
This Robomower is an autonomous robot used to cut lawn grass. It will remain within an area
designated by a boundary wire, start work following a programmed schedule and return to its
charging station as needed. The three sharp blades ensure clean cuts with minimal damage
to the plant, leaving behind tiny snippets as natural fertilizer.
Max cutting area
800 m
2
Battery
862601-INR186500-29E
Lithium-Ion battery, 28V/2.9Ah, 81Wh
Power supply
FY3201500
Input 100-240V AC, 50/60 Hz
Output 32 V DC, CC1.5A
Typical mow time on one charge
80 min
Rated voltage
28 V DC
Rated power
50 W
No load cutting speed
3500 min
-1
Cutting width
18 cm
Blade model / part number
846210
Cutting height adjustment
5 Settings
Cutting height, min-max
20 mm-60 mm
Number of blades
Three (Pivoting)
Charging time
90 min
Recommended time per day*
Please see note 1 below
300 m
2
4 hours
600 m
2
6 hours
800 m
2
8 hours
Degree of protection:
Robomower
IPX4
Charging station
IPX4
Power supply
IP 67
Robomower weight
8.5 Kg
Charging Station weight
2 Kg
Robomower size, L x W x H
570 X 390 X 260 mm
Package size, L x B x H
780 X 510 X 330 mm
Gross weight
18 kg
Measured sound power level
Measured sound pressure
46.6 dB(A) , K=3.0 dB(A)
Guaranteed sound power level
L
WA
= 67 dB(A) (K=0.35 dB(A))
The sound values have been determined according to noise test code given in EN 50636-2-
107, using the basic standards EN ISO 11203 :2009 and EN ISO 3744:2010.
The noise figures quoted are emission levels and are not necessarily safe working levels.
Factors that influence the actual level of exposure of work-force include the characteristics
of the work room, the other sources of noise, i.e. the number of machines and other adjacent
processes and the length of time for which an operator is exposed to the noise. Also the
permissible exposure level can vary from country. This information, however, will enable the
user of the machine to make a better evaluation of the hazard and risk.
*
Note 1: The recommended time per day stated in this specification is just for reference. It
depends on the condition of blades, the type of the grass being cut, the growth condition,
humidity and whether lawn area is flat. A more complex lawn with trees, flower beds,
paths and slopes may require a longer work time.
GENERAL DESCRIPTION
TECHNICAL DATA
