background image

20

21

STORING AND MAINTENANCE

Maintenance Schedule

Performing routine maintenance correctly on your lawnmower will ensure you get years of 
trouble free use.
Please keep this manual safe for future reference.
It is recommended that the following maintenance schedule is adhered to. This will ensure the 
lawnmower operated correctly and is safe to use.

12 hours of use

24 hours of use

36 hours of use

Air filter

clean

clean

replace

Spark plug

check

clean

replace

Engine oil

check

replace

check

The Engine oil should be changed after the first 8 hours.

Transport

1.  Empty the petrol tank.
2.  Always let the engine run until it has used up the remainder of petrol in the tank.
3.  Empty the engine oil from the warm engine.
4.  Remove the spark plug boot from the spark plug.
5.  Clean the cooling fins of the cylinder and the housing.
6.  Use the original packaging to ship whenever possible.

Warranty

If your device develops a fault, please don’t hesitate to contact our customer service
department on 01904 727513, the majority of problems can be solved directly on the phone.

1.  These warranty terms cover additional warranty rights and do not affect your statutory 

warranty rights. All our products are covered by a 2 year manufacturer warranty unless 
this product was registered within 28 days of purchase via www.yardforce.co.uk and 
therefore obtained an additional 12 month warranty.

2.  Claims must be accompanied by proof of purchase. This must be in the form of a Sales 

receipt or bank statement and must show that the product has been purchased within 
the warranty period as described under point 1, from the retailer that it was originally 
bought from. Please keep your receipt safe or staple it to the back of this manual for 
future reference.

3.  Our warranty covers problems caused by material or manufacturing defects, and will 

result in the repair of these defects or replacement of the device with a like for like or 
similar article.

4.  Our devices have not been designed for commercial, trade or industrial applications, any 

signs of use of the equipment in these application or equivalent activities, invalidates the 
warranty.

5.  The following are also excluded from our warranty:

A.  Faults due to accidents, customer misuse or unauthorized repairs
B.  Consumable Parts such as blades, quick release locks, extension cables, wheels, 

grass bags and other accessories that are compatible with the product.

C.  Failure due to lack of routine maintenance.
D.  Failure as a result of not using the equipment in accordance with the manual and 

safety instructions.

E.  The adjustment of cables, drives belts or recoil starters.

Warranty claims should be submitted before the end of the warranty period, see point 1, but
a paid service exists for repairs commissioned after this period. The original warranty period
remains applicable to the device even if repairs are carried out or parts are replaced.
In such cases, the work performed or parts fitted will not result in an extension of the warranty
period, and no new warranty will become active for the work performed or parts fitted.

If you have any problems or questions concerning your garden power tool, please contact our
after sales service at 01904 727513 or visit www.yardforce.co.uk.

STORING AND MAINTENANCE

Summary of Contents for Y2GMB41PC00














Reviews: