background image

23

STORING AND MAINTENANCE

Storing the lawnmower for extended periods

If the lawnmower is to be place into storage for more than 15 days, storage maintenance 
must be performed on the lawnmower. If the following steps are not carried out, when you 
next operate the lawnmower it may not start correctly and may need to be serviced.

CAUTION!

 Do not empty the petrol tank in enclosed areas, near fire or when 

smoking. Petrol fumes can cause explosions and fire.

1.  Empty the petrol tank with a petrol suction pump if available.

2.  Start the engine and let it run until any remaining petrol has been used up.

3.  Change the oil at the end of every season. To do so, remove the used engine oil from 

a warm engine and refill with fresh oil

4.  Clean the cooling fins of the cylinder and the housing

5.  Be sure to clean the entire machine to protect the paint.

6.  Store the machine in a well-ventilated place.

Maintenance schedule

Performing routine maintenance correctly on your lawnmower will ensure you get years of 
trouble free use.

Please keep this manual safe for future reference.

It is recommended that the following maintenance schedule is adhered to. This will ensure 
the lawn-mower operated correctly and is safe to use.

12hours of use

24hours of use

36hours of use

Air filter

clean

Clean 

replace

Spark plug

check

clean

replace

Engine oil 

Check 

Replace 

check

The Engine oil should be changed after the first 8 hours.

Transport

Empty the petrol tank.

Always let the engine run until it has used up the remainder of petrol in the tank .

Empty the engine oil from the warm engine .

Remove the spark plug boot from the spark plug. 

Use the original packaging to ship whenever possible.

Summary of Contents for YF1601


























Reviews: