10
Hotline: 1-866-902-9690
4. Place the upper handle in position over the lower handle, keeping the engine on/off control bar facing
up.
5. Secure the upper handle to the lower handle using the the handle knob and bolt (supplied) see Fig. 4.
TYING DOWN THE BOWDEN CABLE
As shown in Fig. 5
Attach the bowden cable to the handle with the cord clip (supplied).
CHECKING AND FILLING ENGINE OIL
As shown in Figs. 6 to 7
CAUTION!
The following procedures and adjustments must be performed before the engine
is started.
Do not attempt to make any of these adjustments while the engine is running.
CAUTION!
To prevent engine damage, the engine is shipped without oil or gas.
The engine must be filled with the correct grade of oil and gas before starting the engine.
NOTE!
Running the engine with a low oil level will cause engine damage. It is recommend that
high-detergent, premium-quality 4-stroke engine oil used. Using non-detergent oil can shorten the
engine’s service life, and using 2-stroke oil will damage the engine.
CAUTION!
Always use high-quality detergent oil classified SAE30 oil (or equivalent, such as
SAE 5W-30, often called 4-stroke lawn mower oil).
Never use additives with recommended oil.
NOTE:
To check the engine oil level, stop engine and place the mower on a level surface.
ASSEMBLY
Fig. 4
Fig.5
clip
Handle knob and
bolt
